ELECTRONIC ACCESSORIES
F112 FLOWRATE INDICATOR/TOTALIZER WITH LINEARIZATION, ANALOG & PULSE OUTPUTS
The F112 is a versatile flow rate indicator and totalizer with the ability to precisely linearize the flowmeter signal.
In addition to the average K-Factor or Span, 15 linearization points can be entered with their frequencies or values.
The unit will interpolate between these points, greatly enhancing accuracy in any flow range, even for very low frequency applications.
This linearization affects all displayed information as well as the outputs signals.
The display shows flow rate, total and accumulated total.
On-screen engineering units are easily configured from a comprehensive selection.
A wide range of options further enhance this models capabilities, including Intrinsic Safety for hazardous area applications and full Modbus communication.
F118 FLOWRATE MONITOR/TOTALIZER WITH LINEARIZATION,
HIGH/LOW ALARMS, ANALOG & PULSE OUTPUTS
The F118 is a versatile flow rate indicator and totalizer with the ability to precisely linearize the flowmeter signal.
In addition to the average K-Factor or Span, 10 linearization points can be entered with their frequencies or values.
The unit will interpolate between these points, greatly enhancing accuracy in any flow range, even for very low frequency applications.
Moreover, a continuous flow rate monitoring feature is available with high and low flow rate alarm values and up to 3 alarms outputs.
Flow rate and total are transmitted with an analog and scaled pulse output.
The display shows flow rate, total and accumulated total.
On-screen engineering units are easily configured from a comprehensive selection.
A wide range of options further enhance this models capabilities, including Intrinsic Safety for hazardous area applications and full Modbus communication.
© All Contents
Copyrighted Property of Faure Herman, Part of the Liquid Controls Group,
A Unit of IDEX Corporation;
Route de Bonnetable, B.P. 20154, 72406 La FERTE BERNARD, France; tel:
33.2.43602860, fax: 33.2.43602870